Español   |    Careers   |    Site Map     
Contact Us   | Phone #s   | Twitter   | People   | Facilities  
MyAccount Login
Contractors &
Nuclear Emergency, Storm,
Outage, Safety
Investors &
About Us

Large General Service - Time-of-Use Rider - Rate 469L


Who qualifies for this Rider?
This rider is available to all customers capable of maintaining a minimum billing demand of 25,000 kilowatts taking service on any of the following rates:
    General Service - Large
    Large Power - Contract
    Large Power

What is a Time-of-Use rate?
Time-of-Use rates reflect the fact that electricity is more expensive to generate and deliver at certain times. As OPPD moves closer to a peak condition, the costs to provide electricity increase. The time-of-use rider provides a lower rate to customers that may be able to shift some load to off-peak conditions.

OPPD’s General Service – Time-of-Use Rider:
While some utilities offer different energy charges for electricity used during different time-periods, OPPD uses a different demand ratchet. The time-of-use demand ratchet increases the impact of demands during on-peak periods, and reduces the impact of demands used during off-peak periods.

The on-peak period is defined as 11:00 a.m. through 11:00 p.m. on weekdays between June 7 and September 15, excluding holidays. Off-peak includes all hours not defined as on-peak.

Billing Demand for the summer months is the greatest of the following:
    - The highest on-peak demand during the current month or preceding 11 months 
    - 33% of the highest off-peak demand of the current month
    - 25,000 kilowatts

Billing Demand for the winter months is the greatest of the following:
    - The highest on-peak demand occurring during the preceding June 7 through Sept. 15 time period
    - 33% of the highest off-peak demand of the current month or preceding 11 months
    - 25,000 kilowatts

The time-of-use billing demand is used to calculate charges on the customer's base rate.

In addition to applicable base rate charges, each time-of-use customer is charged an additional $56.40 each month to cover the cost of time-of-use metering.

Why are OPPD’s costs higher during peak conditions?
OPPD runs its lowest cost generating units as often as possible. These are called base-load plants. While base-load plants are less expensive to operate, they are expensive to build. This means that base-load plants have a high fixed cost, and low variable costs. To be cost-effective, the District needs to operate baseload plants extensively.

Utilities (including OPPD) also have peaking plants. Peaking plants are smaller generating units that only run when the base-load plants cannot supply all of the electricity needed. These plants are less expensive to build, but are more expensive to operate. This means that peaking plants have a low fixed cost, but higher variable costs.

The cost to build a plant increases fixed costs. By using the right combination of base-load and peaking plants, OPPD keeps its fixed costs low. However, as peaking plants are utilized to supply more electricity, the variable cost (the cost of the next kWh) increases.

When are OPPD’s costs highest?
OPPD’s peaking condition, and highest costs, occur during summer weekday afternoons. Therefore, OPPD’s costs are generally:
    Higher in the summer than in the winter
    Higher on weekdays than on the weekends
    Higher in the afternoons than overnight or in the morning

Rate 469L (PDF, opens in new window)

Back to Special Rate Riders


Residential Rates

Our residential rates web pages contain information on basic service, conservation service and multifamily service rates.


Rates Links

Rates home page


Commercial & Industrial

Municipal Service


Special Riders

Consumer Svc Charges

Products & Services

Energy Purchase


  Mobile    Español   Careers   Site Map    Privacy    Webmaster